The main principle of the Heating of Compression Air Dryer is to use the heat generated by the gas to be compressed for heating and drying the adsorbent in the column to make the moisture desorbed and start cold blowing after pressure dropping through the consumption of dry compressed air, and the adsorbents will be further regenerated.

Technical advantages

• High efficiency and energy saving

• Standard cycle of 8 hours (adjustable)

• Pressure loss :less than 5% rated pressure

• Low regenerated consumption: around 2.5%

Applications

• Centrifugal compressor provides non-oil compressed air

Specification

• Inlet temperature: 100℃~140℃

• Pressure: 0.6~1.0 Mpa

• Pressure dropping: ≤0.4 bar

• Pressure dew point: -40℃ (other)

• regenerated consumption: ≤2.5%

• Outlet compressed air temp: ≤42℃

• Oil content: ≤0.1ppm

• Air consumption: ≤20%

• Pressure of cooling water: 1.5~5bar

• Cycle: T=8 (hrs)